Photo: A paper chain garland on a Christmas tree. Saucy Salad / Flickr, CC BY 2.0.
Paper Christmas garlands run from book-page stars to folded origami chains, and two decisions shape every one of them: the weight of the paper, and the glue holding it together.
Craft and origami papers print a gsm figure on the pack, so you can match the paper to the job. Old book pages do not. There is no gsm printed on a book, and the stock varies from edition to edition, so judge book paper by how it behaves under a punch and under glue rather than by a number.
One rule before anything gets cut: book-page projects use old, damaged or discarded books you already own, or paper bought for the project. Library books stay intact.
For another garland built from repeated paper units, see the Thai paper flower garland. Another Christmas project to make at home is this set of festive hand-lettering ideas for Christmas cards.
Book-page star garland: punched pairs on twine, glued with Elmer’s white glue
The method comes from Passionate Penny Pincher’s DIY paper star garland tutorial, published 29 November 2025, which calls for Elmer’s white glue and a small paintbrush.
What you need:
- Old book pages, from a damaged or discarded book you already own
- Scrapbook or colored paper for alternating stars. Canson Colorline is 150 gsm, double-sided with a smooth face and a grained face, made in France, and described by the maker as ideal for drawing and creative activities
- Star hole punches
- Elmer’s white glue and a small paintbrush
- Twine and scissors
Elmer’s says its Glue-All / Multi-Purpose Liquid Glue “bonds strongly to a variety of different materials, including paper, ceramics, leather, fabric, wood, and more,” which is why one bottle can cover paper work of this kind.
How it goes together:
- Cut the twine to the length of the run you want to hang.
- Punch the stars in pairs, so every star has a matching partner.
- Paint glue over one star with the small brush.
- Lay the twine across the middle of the glued star.
- Press the matching star on top, sandwiching the twine between the two.
Spacing is worth planning. The tutorial suggests about 2 inches between stars; the writer worked at 3 to 4 inches and wished the stars had been closer together. Lay the whole run out before gluing so the gaps stay even.
Alternate book pages with Colorline stars if you want the printed text to read as pattern against blocks of flat color.
Origami decorative chain: Yasutomo origami paper, two squares per link, paper glue
This is modular origami, so the paper has to take a sharp crease without cracking. Yasutomo origami assortment 4251 is 57.5 gsm, 100 sheets in 20 colors at 5 7/8 inches square, colored on one side and white on the back, so the white reverse can show where the folds turn.
The method is UCandoStuff’s origami decorative chain, published 12 September 2010 and listed as an easy modular chain. Its materials list calls for paper glue; Elmer’s Multi-Purpose bonds paper, as above.
Each link uses two equal squares:
- Fold each square into a unit, starting from the diagonal creases and then working through the stepped folds shown in the tutorial.
- Put a little glue on the point of one unit.
- Insert that point into the slit of the second unit.
- Repeat on the other side to finish the link.
To add the next link, glue only one side first, pass the unit through the last finished link, then close the second side. That order is what keeps the chain interlocked instead of leaving separate rings to join later.
Every sheet in the 4251 pack is already square, so no trimming is needed before folding. Set out your color sequence at the start if you want the finished chain to repeat a pattern.
Simple paper chains: Colorline or origami strips, taped, glued or stapled
The loop chain is the quickest garland to assemble and the easiest one to hand to children. The method from the Origami Resource Center’s paper chains guide is short: cut strips, fasten the ends of one strip into a loop with tape, glue or a staple, insert the next strip through that loop and close it, then keep going.
Paper choice changes the result:
- Canson Colorline at 150 gsm is the heavier of the two and holds its loop shape. Its double-sided finish means both faces of the loop show color.
- Yasutomo 4251 origami paper at 57.5 gsm is lighter and more flexible, and its white back shows inside each loop.
On fastening, the guide gives three options and no ranking. Staples are fast. Tape suits small hands. Glue gives a flat join, and Elmer’s Multi-Purpose holds paper to paper; press the overlap and hold it until the bond grabs before threading the next strip.
The tutorial does not give a strip size, so there is no measurement to copy. Cut one test loop from the paper you plan to use, check it against the width of the mantel or window you are dressing, then cut the rest to match that strip exactly.
Store the finished garlands flat or loosely coiled in a box rather than folded, and the glued joins will come out of storage in the same shape they went in.

Pinterest pin: typography added to a crop of the same photograph for this article. Adapted from Saucy Salad, CC BY 2.0, via Flickr.

